Brass compression to 1/2″ NPT elbow can be installed or as specified.
55,000 BTU input – 44,000 BTU output at maximum burn at 8.5 WCI manifold pressure.15,000 BTU input – 10,600 BTU output at low burn at 1.2 WCI manifold pressure.
(88°F temperature rise per gallon per minute continuous flow at high burn).
Fuel Consumption:2.55 lbs per hour at maximum input. (At 2 GPM of water, 20 lbs of propane will produce over 940 gallons of hot water).
Mounting:Floor mounted flanges (included)
Clearances:Zero clearance top (blower), bottom and sides. 2″ in back for hook-ups. Enough space in front to remove cover for service.Venting:2” power vent with proofing switch. (2” stainless flex duct recommended to the outside, and can run up to 15′).
Modular: Three assemblies; gas, electronics and water. Burner: High primary air, 12 element, atmospheric type.
Aluminized steel body with stainless flame strips.
Heat exchanger: Copper fin tube type with wrap for cooling.
Electronics: Plug in, potted, works-in-a-drawer.
Burner and flue assembly are stainless steel.
Fuel:Propane at 11 WCIPower:
Burner: 12 element high primary air, atmospheric type with stainless steel construction.
Orifices: Brass # 71 x 12.Gas Valve: Redundant solenoid with integral regulator.
Mounting: Mounting flanges included. Must be mounted in accordance with any applicable Coast Guard and ABYC recommendations.Safety Features:
The ShowerMate is pilotless. There is no flame unless water flow is sensed.Flame rectification: Gas valve shuts off in .8 of a second if there is a flame outage.
Redundant gas solenoid.
Electronic high temperature shut-off (2).
ECO high temperature shut off @ 165°F with manual reset.Pressure relief valve at 100 PSI.
Power vent must proof fluing before gas valve opens.
Disclaimer: Due to continuous product improvement, PrecisionTemp reserves the right to change specifications at any time.
AffordableMiniSplits is an Authorized PrecisionTemp Dealer.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.