Eccotemp i12-Natural Gas Vertical or Horizontal Bundle Kit
This bundle includes the i12-Natural Gas Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Vertical vent kit.
The Eccotemp i12-NG has a new revolutionary design, making it unlike any other tankless water heater on the market today. This model features a sleek black acrylic glass casing, fully automatic temperature controls for prescision, touch screen and LCD temperature display which shows output temperature as well as GPM flow. Rated at an impressive 4 GPM, the Eccotemp i12-NG Tankless Water Heater is a natural gas fired, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. The Eccotemp i12-NG is perfect for vacation cabins, cottages and smaller homes.
The i12-NG comes with a horizontal stainless steel vent kit, ready to install and with its 120 volt UL listed power cord powering the internal exhaust fan and digital display. It only pulls about 2 watts idol and 1.07 Amps during operation, making it an ideal energy efficient appliance.
The i12-NG offers a 35-40 degree F temperature rise when operating at flow rate of 4 gallons per minute and a 77 degree F temperature rise at 1.5 gallons per minute.
Field tested to 5500 ft. elevation (not recommended to be used any higher)
Power ventilation for safety and efficiency
Tested-Safe Electronic Ignition System
LCD temperature display
Weighs only 33 pounds
Unit Dimensions are 15”x24”x4”
Stainless vent kit included
Uses gas only when hot water is on
Requires standard household 120 volt electric outlet
UL listed electrical components
Two year warranty
Hot water capacity range: 0.6 - 4.8 GPM
Maximum / Minimum gas rate: 25,000 - 80,000 BTUs
2.5 to 3" Stainless steel adapter
This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with backflow preventer to ensure that freezing air does not come back through the vent pipe.
Eccotemp Vertical Ventilation kit 3"
This 3" single walled Z-Flex Vertical vent kit is for vertical installations only. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet as well as need a condensation drain. Also remember A max vent run of 20 FT. subtracting 4 Ft. for every 90 Degree elbow in the run.
1 x 3" Rain cap
1 x 3" Top support/Storm collar
1 x 3" Adjustable roof flashing (specify either normal or steep flashing)
1 x 3" Paloma Appliance Adapter
1 x 3" Back flow preventer
Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.